Description

①Rapid heating
②Air-cooled heat dissipation system for long lasting cuts
③Blade temperature: 5~10 seconds heating to 600°C
④Frequency: 50/60HZ
⑤Continuous use time: use 30S intermittent 1-2 seconds
Note: Lithium cold air style battery not included !!! Apply to Makita models, battery recommended 18-21v, 4ah-6ah
21*4=84W 21*6=126W
Cutting steps:
1.Put the blade on the cutting object,then press the trigger. Preheat for a few seconds to cut recommended
It is recommended to test on the waste material first.
2. The temperature adjustment wheel is divided into 16 levels, the shorter the raised wire on the wheel, the lower the output power.
3. It is best to keep the temperature and speed in harmony when cutting. If there is too much smoke, it may be because the cutting speed is too slow or the blade temperature is too high. This may
cause the cutting track to be irregular.
4. Release the switch when you are 3-50M away from the end of cutting.
5. After cutting, clean the blade with a brass wire brush.
Cautions
1. Be sure to use this tool in a ventilated environment.
2. Do not burn the debris on the blade, otherwise the blade will be bent.
3. Do not dry burn the blade, please contact with the cutting object before heating.
4. Do not touch the blade and do not place the hot blade next to clothing or flammable materials.
5. Handle the blade after it has cooled down to avoid accidental injury.
6. Please do not make the blade burn red without cutting materials.
7. Super high power output will make the blade overheat and deform, and may also make the knife seat overheat.
Damage the tool. Adjust the output power to reach a reasonable cutting speed.
8. Use the tool intermittently, do not use it continuously for a long time, it is recommended to release the switch for one or two seconds after 30 seconds of continuous use, so as not to overload the tool and burn the blade.