Description

无涂层 ； 半涂层； 全涂层
No coating; Semi coating; Full coating
TCT three-blade opener
The difference between a horizontal groove and a universal one: There is a horizontal groove on the horizontal groove blade, and the universal blade does not have a horizontal groove. The characteristics of the horizontal groove are that it can crush the wood chips, and the chips are cut quickly. The disadvantage is that the horizontal groove may burst or be rough when it hits the edge of the board; GM avoids the disadvantages of the three-edge burst or burr of the horizontal groove, but the chip and cutting speed Relatively slower than the horizontal slot. The three-edged straight knife can be drilled and milled. In addition, the precision requirements of the collet nut are high.
Three-blade straight flute cutter, mainly for milling multi-layer boards, ecological boards (large core boards), and particleboard. Advantages: Fast milling and long service life; Disadvantages: There may be burrs when the horizontal grooves are milled to the surface of the particle board, and the milling depth should be adjusted.